injector hold down torque Ford Truck Enthusiasts Forums

7 3 Injector Hold Down Torque. Hino Jo8e Injector Hold Down Torque 5) 14 Remove the outboard retaining bolt on the fuel injector *NOTE* The most common install issue with these injectors is not having the injector FULLY seated and CORRECTLY torqued.If the copper tip sealing gasket does not properly 'crush', the injectors will start to leak in a couple of weeks time.

Tighten the 12mm banjo bolt that goes into the head to 11 lb ft Tighten the lower valve cover bolts in sequence to 10Nm 89 lbin twice Tighten the injector harness bracket bolts to 9 Nm or 80 lbin 7mm connectors to 2Nm or 18 lbin Steves looking for me but figured id get a back up.

Ford 7.3L Powerstroke Diesel Lower Injector Hold Down Bolt F4TZ9R523C

Tighten the return line banjo bolts to 12 Nm or 106 lbin The bolt might have broke because i was using a 1/2" with a 3/8 to 1/4 adapter and mighta been putting extra pressure at a weird angle *NOTE* The most common install issue with these injectors is not having the injector FULLY seated and CORRECTLY torqued.If the copper tip sealing gasket does not properly 'crush', the injectors will start to leak in a couple of weeks time.

injector hold down torque Page 2 Ford Truck Enthusiasts Forums. The bolt might have broke because i was using a 1/2" with a 3/8 to 1/4 adapter and mighta been putting extra pressure at a weird angle Thought it might come in handy for the DIY guys that do not have the

Cat C15 Injector Hold Down Bolt Torque. (the ones that use the key hole in the injector hold down) are not out at all 5) 14 Remove the outboard retaining bolt on the fuel injector